HomePageProduct PageContact PageNewsletter PageDownload Page

IPC Chassis

19" Cabinet

Power Supplies

CPU Card

Backplane

Fanless Solutions

Bare Bone System

Accessories

Special Offer

WAFER-NM701-1007U

3.5” SBC with on-board Intel® Celeron® Dual-core 1007U 1.5GHz Processor, DDR3, VGA/LVDS, Dual GbE, USB 2.0, mSATA, SATA 3GB/s and Audio

 

Catalog

Features

1. 3.5” SBC with on-board 32nm 1.5GHz Intel® Celeron® 1007U dual-core mobile processor
2. VGA and LVDS support dual display
3. One 204-pin 1333/1600MHz DDR3 SO-DIMM supports up to 8GB memory
4. Easy fanless thermal design by assembling heat spreader on system chassis
5. Supports four COM, six USB 2.0, two SATA 3Gb/s, one mSATA and audio
6. IEI One Key Recovery solution allows you to create rapid OS backup and recovery

Specifications

CPU On-board 32nm 1.5GHz Intel® Celeron® 1007U dual-core mobile processor
PCH Intel® NM70
BIOS UEFI BIOS
System Memory One 204-pins 1333/1600 DDR3 SO-DIMM supported (system max. 8GB)
Ethernet Dual PCIe GbE by Realtek RTL8111E controller with ASF 2.0 support
I/O Interface 2 x USB 2.0 (on rear)/ 2 x SATA 3Gb/s with SATA 5V power connector/ 4 x USB 2.0 (by pin header)/ 1 x 6-pin wafer for PS/2 KB/MS/ 1 x RS-422/485 (by pin header)/ 3 x RS-232 (1 on rear, 2 by pin header)
Digital I/O 8-bit digitial I/O (4-bit input/ 4-bit output)
Super I/O Fintek F81867
SMBus 1 x 4-pin (1x4) wafer
Audio Realtek ALC662 HDA codec (Line-in, Line-out, Mic)
Display Interfaces Dual independent display support/ VGA integrated in NM70 (2048x1536@75MHz)/ Dual channel 24-bit LVDS integrated in NM70 (1920x1600@60MHz)
Expansion 1 x Full/Half-size PCIe Mini card slot with mSATA support
Watchdog Timer Software programmable support 1~255 sec. System reset
Power Supply 12V only, AT/ATX support
Power Consumption 12V@2.72A (Intel® mobile Celeron® 1007U 1.5GHz processor with 1333MHz 8GB/ DDR3 memory)
Graphic Intel® HD Graphics Gen 6 support for DX10.1 and OpenGL 3.0/ Full MPEG2, VC1, AVC Decode
Operating Temperature Operating Temperature : -10°C ~ 60°C/ Storage Temperature: -20°C ~ 85°C
Humidity 5% ~95%, non-condensing
Dimensions 146 mm x 102 mm
Weight GW:600g / NW:250g
Front Panel 1 x 10-pin (1x10) header
Fan Connector 1 x 4-pin CPU fan connector 1 x 3-pin system fan connector (smart fan support)

Ordering Information

Part No. Description
WAFER-NM701-1007U-R10 3.5” SBC with on-board Intel® Celeron® Dual-core 1007U 1.5GHz Processor, DDR3, VGA/LVDS, Dual GbE, USB 2.0, mSATA, SATA 3GB/s and Audio
32000-044300-RS Dual port USB cable
32205-003800-100-RS RS-422/485 cable, 200mm
32200-000049-RS RS-232 cable, 200mm, pitch 2.0mm

Packing List

1 * WAFER-NM701-1007U single board computer 2 * Plastic shaft for securing half-size PCIe Mini card (P/N:43124-0010C2-01-RS)
1 * PS/2 KB/MS Y-cable (P/N:32006-001100-100-RS) 2 * SATA with power cable kit (P/N:32801-000201-100-RS))
1 * Audio cable (P/N:32007-002600-100-RS) 1 * Power cable (P/N:32100-087100-RS)
1 * RS-232 cable (P/N:32200-000049-RS) 1 * QIG (Quick Installation Guide)
1 * Heat spreader 1 * One Key Recovery CD
1 * Mini jumper pack 1 * Utility CD